Real-time fluorescent quantitative immuno-PCR method for determination of fluoranthene in water samples with a molecular beacon

A reliable and sensitive competitive real-time fluorescent quantitative immuno-PCR (RTFQ-IPCR) assay using a molecular beacon was developed for the determination of trace fluoranthene (FL) in the environment. Under optimized assay conditions, FL can be determined in the concentration range from 1 fg/mL to 100 ng/mL, with y = 0.194x + 7.859, and a correlation coe cient of 0.967 was identified, with a detection limit of 0.6 fg/mL. Environmental water samples were successfully analyzed, recovery was between 90% and 116%, with intra-day relative standard deviation (RSD) of 6.7%–12.8% and inter-day RSD of 8.4%–15.2%. The results obtained from RTFQ-IPCR were confirmed by ELISA, showing good accuracy and suitability to analyze FL in field samples. As a highly sensitive method, the molecular beacon-based RTFQ-IPCR is acceptable and promising for providing reliable test results to make environmental decisions.     

Production of a newly isolated Paenibacillus polymyxa biocontrol agent using monosodium glutamate wastewater and potato wastewater

A phyllosphere bacterial strain EBL-06 was isolated from wheat leaves. The morphology, cultural characteristics, phospholipid fatty acids, physiological and antagonistic fungus activities of this strain were investigated. A phylogenetic tree was constructed by comparing with the published 16S rDNA sequences of the relevant bacteria. The results showed that the isolate EBL-06 was a strain of Paenibacillus polymyxa; this strain performed a high level of antagonistic fungus activity toward a broad spectrum of phytopathogens, such as Botrytis cinerea, Cladosporium cucumerinum, Fusarium spp. The isolate EBL-06 can grow well using monosodium glutamate wastewater (MGW) and potato wastewater (PW) as culture medium. The maximum yield of 6.5 × 10 9 CFU/mL of the isolate EBL-06 anti-fungus biocontrol agent was reached in 15 hr cultivation at 28°C, pH 6.0–7.5 using the mixture of MGW and PW (1:9).     

显色环保型融雪剂的研制

研究开发显色环保型融雪剂,添加了缓蚀剂和对植物生长有益的植物钙剂,能够减少对金属、路面、植物等的腐蚀,并根据融雪剂颜色的变化,控制融雪剂用量。试验结果表明：显色环保型融雪剂使用量在20 g以下时,融冰量随着融冰时间的增加而增加,融冰量在融冰时间80分钟左右达到最大值,80分钟以后融冰量随着融冰时间的增加而减少,最佳融冰比为1：5（1份融雪剂：5份冰）。三种融雪剂的融冰效果为：自制融雪剂〉市售融雪剂〉氯化钠,且自制融雪剂对金属的腐蚀性小,对植物的生长基本没有影响。     

CSTR系统发酵产氢细菌群落动态与产氢能力关系解析

将CSTR系统内pH由4.2一次性提高至6.0左右,启动发酵类型的转化,研究了转化过程系统内的产氢动态和细菌群落.结果表明,在有机负荷维持在（33±1）kg/(m³·d)的情况下,发酵类型10 d内未发生改变,产氢量8 d内未降低,15 d后系统内种群由乙醇型转化为丁酸型,进水碱度由250 mg/L增至2 450　mg/L.研究中利用荧光原位杂交技术（FISH）对反应系统内3类微生物群进行监测发现,在转化过程中Clostridium cluster XI数量增加,Clostridium cluster Ⅰ 和Ⅱ数量减少,而Enterobacteriaceae始终存在,变化不明显.种群的消长同反应系统产氢能力的高低存在密切关联,以Clostridium cluster Ⅰ和Ⅱ占优势的乙醇型发酵具有更佳的产氢能力,平均比产氢速率为23.6 mol/(kg·d).     

A bioaugmentation failure caused by phage infection and weak biofilm formation ability

Two biological aerated filters (BAF) were setup for ammonia removal treatment of the circulation water in a marine aquaculture. One of the BAFs was bioaugmented with a heterotrophic nitrifying bacterium, Lutimonas sp. H10, where the ammonia removal was not improved and the massive inoculation was even followed by a nitrification breakdown from day 9 to 18. The nitrification was remained stable in control BAF operated under the same conditions. Fluorescent in situ hybridization (FISH) with rRNA-targeted probes and cultivable method revealed that Lutimonas sp. H10 almost disappeared from the bioaugomented BAF within 3 d, and this was mainly due to the infection of a specific phage as revealed by flask experiment, plaque assay and transmission electron observation. Analyses of 16S rRNA gene libraries showed that bacterial groups from two reactors evolved di erently and an overgrowth of protozoa was observed in the bioaugmented BAF. Therefore, phage infection and poor biofilm forming ability of the inoculated strain are the main reasons for bioaugmentation failure. In addition, grazing by protozoa of the bacteria might be the reason for the nitrification breakdown in bioaugmented BAF during day 9–18.     

含铬电镀废水的资源化处理

针对电镀厂产生的高浓度含铬废水,研究了硫化钠还原沉淀法回收电镀废水中的铬的可能性。讨论了pH、投药量、反应时间和搅拌速率等变量对铬回收效果的影响。结果表明:在pH1.6,工业硫化钠(60%)投加量为4.0g/L废水,搅拌速率170r/min和反应时间t=90min的条件下能够将原水中初始浓度为533.1mg/L的三价铬C(rⅢ)和530.0mg/L的六价铬[C(rⅥ)]分别降到42.9mg/L和0.01mg/L。此时铬渣中三氧化二铬(Cr2O3)含量为29.5%,满足回用要求。接下来,为了进一步去除残余的三价铬C(rⅢ),利用正交试验设计讨论了重金属捕集剂(FZ)对其去除的最佳条件。在上述条件下出水中总铬(TCr)浓度最终降到0.94mg/L。     

以Al-Ferron逐时络合比色法研究有机硅铝复合絮凝剂中铝的形态分布

以正硅酸乙酯(TEOS)、二乙氧基二甲基硅烷(DEDMS)、?-氢丙基二乙氧基甲基硅烷(APDES)这3种硅烷偶联剂为硅源.合成了新型的有机硅铝复合絮凝剂,利用Al-Ferron逐时络合比色法研究了这3种絮凝剂的铝形态分布.结果表明,3种系列有机硅铝复合絮凝剂中,硅源、碱化度(B)、Si/Al摩尔比对铝形态分布都有影响.其中,碱化度对铝形态的影响较大.3种产品表现出类似的变化趋势.随碱化度的增大,Al,含量呈现下降趋势,而Alh和AIr含量则明显上升.以TEOS为硅源的产品中,Al为主要形态;以DEDMS为硅源的产品中,硅源对铝形态的影响不明显;以APDES为硅源的产品中.Alh则为主要形态,其含量随Si/Al摩尔比的增大而增多.     

利用铜矿尾砂研制低强度可控性填料

利用铜矿尾砂、粉煤灰、水泥以及加气剂等,混合搅拌成泥浆体,振动成型,制备出低强度可控性填料(CLSM).试验表明:以水泥12.9％、铜矿尾砂(细集料)22.6％、加气剂3.2％、粉煤灰12.9％等工业废弃物,加水48.4％,固液比控制在(14～15):(15～16)之间,制得的CLSM制品,抗压强度0.35～2.00 ...     

污染底泥的原位钝化技术研究进展

底泥是湖泊重要的内源污染来源,关于底泥污染控制的研究近年来受到广泛重视。目前对底泥污染的控制技术主要包括原位处理技术和异位处理技术。原位处理技术主要包括钝化、覆盖、生物修复等。钝化技术是一种高效的湖泊内源污染控制技术,它通过抑制内源营养盐的释放来控制水体营养盐含量。文章综述了底泥原位钝化技术的研究及其应用情况;分析了原位钝化技术的特点及主要功能;介绍了常用底泥钝化剂的应用情况以及新型钝化剂的研究进展;并对原位钝化技术的未来发展进行了展望。     

一种快腐菌剂在堆肥制作中的应用研究

在接种和未接种条件下,研究了一种菌剂YD-KFI对堆肥制作效果.结果发现,接种该菌剂加快堆肥升温速度、提高最高温度、延长高温维持时间;堆肥制作的升温期和高温期,接种菌剂分别促进了淀粉、可溶性糖和粗纤维等物质的降解,加快了堆肥的腐熟进程.采用PCR-DGGE方法,分析该菌剂对堆肥制作不同阶段微生物群落的影响,发现在堆肥制...